Unlock BlackBerry OS (Curve, Bold, Torch etc)

Read This First
* With the provided Unlock codes, if you are receivng “Code Error”, DO NOT WORRY! proceed to the end of the page to the “Trouble Shooting” section on how to proceed.
* DO NOT use all of the attempts to enter the Unlock code otherwise your phone will be Hardlocked (MEP 0), Contact us First if you have less than 5 tries left to enter the Unlock Code.

There are Multiple Unlock Codes Above, which One is it?
.

If you only received 1 Unlock Code, Don’t worry about this part, use the code provided above. Or if the Unlock Codes above contain the words “Preferred” OR “Other Codes” try using those codes first.

* Unlock Code is Normally the NCK Code or MEP2 code
.
Example:
SIM Code …: XXXXXXXXXXXXXXXX………. MEP1
NCK Code …:
XXXXXXXXXXXXXXXX
………. MEP2 <== Network Unlock Code (MEP2)
Subset Code :
XXXXXXXXXXXXXXXX
………. MEP3
Prov Code ..:
XXXXXXXXXXXXXXXX
………. MEP4 <== Service Provider Code (MEP4), if required only
Corp Code ..:
XXXXXXXXXXXXXXXX ………. MEP5

.
* Some Blackberry phones need the Prov Code or MEP4 (Service Provider) code, normally Telus, Koodo, and Bell Blackberrys.
.
———- Code Input Instructions ———-
How to Enter the Unlock Code into my Blackberry?

How to Enter Unlock Codes on BlackBerry (Most Models)
1) Start the phone on with a Non accepted simcard in the phone
2) On the main menu, Go to settings
3) Go to advanced options, then simcard.
4) Type MEPD (you can’t see anything typed on your screen)
5) Type in MEP, hold ALT and press 2, another screen pops up for the code
6) Input the 8 or 16 digit Unlock code sent to you, it will say “Code Accepted”
7) Phone is now unlocked
.
OR
.
1) Go to options, device settings, advanced system settings, simcard
2) Type in MEPD using the keyboard (nothing will show on screen)
3) Type in MEP, hold ALT and press 2, another screen pops up for the code
4) Enter the code, remember you ONLY have 10 chances to get it right
5) Press the enter key
.

OR
.
1) Start the phone on with a Non accepted SIM card in the phone
2) Phone will display Sim Unlock Code is Needed to Use the phone proceed?
3) Click yes, and input the 8 or 16 digit Unlock code sent to you
4) Phone is now unlocked.
.
Alternative Blackberry Code Input Instructions
How to Enter Unlock Codes on BlackBerry Curve 9320
1) Go to options, device settings, advanced system settings, simcard
2) Type in MEPD using the keyboard (nothing will show on screen)
3) Hold ALT, then type in MEP2 while holding alt; another screen pops up for the code
4) Enter the code, remember you ONLY have 10 chances to get it right
5) Press the enter key

How to Enter Unlock Codes on BlackBerry Bold 9900/9930, 9850/9860, 9360/9370/9380
1) Start the phone on with a Non accepted simcard in the phone
2) Phone will display Sim Unlock Code is Needed to Use the phone proceed?
3) Click yes, and input the 8 or 16 digit Unlock code sent to you
4) Phone is now unlocked
.
How to Enter Unlock Codes on BlackBerry Bold 9700, Curve 8520,83xx

1) Start the phone on with a Non accepted simcard in the phone,
2) On the main menu, Go to settings
3) Go to advanced options
4) Type MEPD (you can’t see anything typed on your screen)
5) Type in MEP, hold ALT and press 2, another screen pops up for the code
6) Input the 8 or 16 digit Unlock code sent to you, it will say “Code Accepted”
7) Phone is now unlocked
How to Enter Unlock Codes on BlackBerry Torch 9800/9810, Bold 9780, Curve 93xx
1) Go to options, device settings, advanced system settings, simcard
2) Type in MEPD using the keyboard (nothing will show on screen)
3) Type in MEP, hold ALT and press 2, another screen pops up for the code
4) Enter the code, remember you ONLY have 10 chances to get it right
5) Press the enter key
How to Enter Unlock Codes on BlackBerry Storm 9550/9530, Tour 9630, Bold 9650
1) Need a Non accepted SIM card inserted into the phone (any simcard not from the original carrier)
2) Go to Options, then Mobile Network Settings, Technology, change it to GSM/UMTS.
3) Go to Settings Menu, Options, Advanced Options and then SIM Card.
4) Hit the menu button and select show keyboard
5) Type in mepd using the keyboard (nothing will show on screen)
6) Type in mep2 another screen pops up for the code
7) Enter the code, remember you ONLY have 10 chances to get it right
8) Press the enter key
9) A message will appear saying code accepted
10) Turn device off, insert SIM of your choice if have not done so already
11) Turn the phone back on, you should be able to make calls.
How to Enter Unlock Codes on BlackBerry Pearl 91xx – 81xx

1) Start the phone on with a Non accepted simcard in the phone, and Go to settings
2) On the main menu, Go to settings
3) Go to advanced options
4) Type MEPPD (you can’t see anything typed on your screen)
5) Type in MEPP, hold ALT and press 2, another screen pops up for the code
6) Input the 8 or 16 digit Unlock code sent to you, it will say “Code Accepted”
7) Phone is now unlocked
.

How to Enter Unlock Codes on BlackBerry CDMA Devices (SPC / MSL Code)

1) From the mainscreen of the BlackBerry, press the green call button to enter the phone
2) Type in ##MSLCODE then the green talk button (ie: ##123456 Green talk button)
3) In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number
4) Press the menu key and choose save
5) The device will re-boot
6) When the device re-boots, Activation Required will be gone and the active carrier name will now appear

How to Enter Unlock Codes on BlackBerry Z10

1) Insert a non accepted simcard and power phone on.
2) Go to Settings > Security and Privacy > Simcard
3) Press “Unlock Network”
4) Enter the 8 or 16 digit code
*If you received a 16 digit code and you are receiving an error, use the first 8 digits of the 16 digit code.

How do I know my Phone is Fully Unlocked?

On your phone, go to “Simcard”, press “MEPD”. You will see:

SIM: Disabled
Network: Disabled / Inactive
Network Subset: Disabled
Service Provider: Disabled
Corporate: Disabled
*If everything is disabled or inactive, your phone is fully unlocked

———- Trouble Shooting ———-

“Code Error” What do I do?

Please DO NOT WORRY!

1. Go to options and then status, and check IMEI number with decimals included.
2. Find us your phone’s PRD number (on the back of the phone looks like PRD-XXXXX-XXX)
Email this information to us ([email protected])

My Phone displays “MEP 0” What is this?

This means your phone is hardlocked and has no more attempts to Unlock your device. At this point there are no alternatives to unlock this device.
I can make Calls and Text but I’m not getting Internet Service.
In this case you will need to adjust what’s called the APN settings. The APN settings vary depending on the service provider you are trying to use. Please contact your service provider and they can assist you setting this up. There is no separate unlock for data or internet. If you can call or text, your phone’s network is fully unlocked. Also keep in mind, if your phone cannot use BBM, or other Blackberry services, Black devices need a special “Blackberry Dataplan” which you can get from your service provider
My Phone is asking for the “PUK” or “Security Pin” or “Password”
If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you. You can contact your service provider for this. Once you bypass this, you can use the Network Unlock Code provided by us.